We recommend the conventional core barrel type b for homogenous formations. So you can take your samples with better ease. The B range is available from diameter 46 mm to diameter 1416 mm.
Adaptable for your core drillings. We offer different lengths: 500, 1000, 1500 and 3000 mm. You can acquire type B core drilling heads independently.
The simple core barrel B does not have an internal tube. That is why it is often selected to get a lower cost per meter drilled compared to the double core barrel. It is composed of only a few component parts.
Moreover, the bits have a small cutting surface, this lowers the operating costs and speeds up the penetration.
Note: As the inner tube is not present, it will be difficult to preserve the entire core if you’re drilling in heterogeneous terrain.
We recommend the conventional core barrel type b for homogenous formations. So you can take your samples with better ease. The B range is available from diameter 46 mm to diameter 1416 mm.
Adaptable for your core drillings. We offer different lengths: 500, 1000, 1500 and 3000 mm. You can acquire type B core drilling heads independently.
The simple core barrel B does not have an internal tube. That is why it is often selected to get a lower cost per meter drilled compared to the double core barrel. It is composed of only a few component parts.
Moreover, the bits have a small cutting surface, this lowers the operating costs and speeds up the penetration.
Note: As the inner tube is not present, it will be difficult to preserve the entire core if you’re drilling in heterogeneous terrain.
We remain at your disposal for any further information!
► Technidrill Head Office
(Lyon – France)
+33 (0)472 476 672
► Technidrill Sales Departement
(Carros – France)
+33 (0)492 088 328
sales@technidrill.com
► Technidrill Head Office in Lyon
55 Rue Ampère,
69680 Chassieu – FRANCE
► Technidrill Logistics Base
Lieu-dit Le Moulin,
06670 Castagniers – FRANCE
► Technidrill Production Unit
1ère Avenue, 18ème Rue 06510 Carros – FRANCE